Linksys WAPPOE12 12 Volt Power Over Ethernet Adapter Kit

From the Manufacturer
The Linksys 12 Volt Power Over Ethernet Adapter Kit lets you put your access points almost anywhere, by removing the requirement of nearby power outlets. By using the existing Category 5 Ethernet cabling to deliver power to many standard 12 volt access points and other network devices, you save the time, hassle, and expense of running AC power to the access point's installation location.

The best position for a wireless access point is usually on the ceiling, in the center of the area to be covered. Second best would be high on a nearby wall. Unfortunately, there's usually no easily accessible AC power plugs available in these locations. With the Power Over Ethernet Adapter Kit, installing the access point in these preferred spots becomes far less trouble.

The 12 Volt Power Over Ethernet Adapter Kit is a two piece set. The "Injector" sends both power and data over one Category 5 cable to your access point, wireless router or bridge. Then the tiny "Splitter", placed at the remote location, separates the network data and DC power back into two cables, and delivers them to the access point. The Injector can also be used by itself with POE-enabled network devices that accept 48 volts directly on a POE port.

When it's time to expand your wireless network, let the Linksys 12 Volt Power Over Ethernet Adapter Kit simplify your installation.

Product Description:
12 Volt Power Over Ethernet Adapter Kit The Linksys 12 Volt Power Over Ethernet Adapter Kit lets you put your access points almost anywhere, by removing the requirement of nearby power outlets. By using the existing Category 5 Ethernet cabling to deliver power to many standard 12 volt access points and other network devices, you save the time, hassle, and expense of running AC power to the access point's installation location. The best position for a wireless access point is usually on the ceiling, in the center of the area to be covered. Second best would be high on a nearby wall. Unfortunately, there's usually no easily accessible AC power plugs available in these locations. With the Power Over Ethernet Adapter Kit, installing the access point in these preferred spots becomes far less trouble. The 12 Volt Power Over Ethernet Adapter Kit is a two piece set. The "Injector" sends both power and data over one Category 5 cable to your access point, wireless router or bridge. Then the tiny "Splitter", placed at the remote location, separates the network data and DC power back into two cables, and delivers them to the access point. The Injector can also be used by itself with POE-enabled network devices that accept 48 volts directly on a POE port.

Linksys WAPPOE12 12 Volt Power Over Ethernet Adapter Kit
Average customer rating:
Linksys WAPPOE12 12 Volt Power Over Ethernet Adapter Kit

Manufacturer: Linksys
ProductGroup: CE
Binding: Electronics

Power Supplies | Computer Accessories | Accessories & Supplies | Categories | Electronics
Similar Items:

Linksys-Cisco WRT54GL Wireless-G Broadband Router (Compatible with Linux)

D-Link DWL-P200 Power Over Ethernet Adapter

Linksys WRT54GX4 Wireless-G Broadband Router with SRX400

Linksys High Gain Antenna Kit for TNC Connectors HGA7T

Netgear GS105 10/100/1000 Mbps 5-port Gigabit Ethernet Switch

Product Features:

Simplifies your wireless installations by combining power and data onto one cable

Eliminates cost and hassle of running AC power to wall- or ceiling-mounted network devices

Works with standard Category 5 Ethernet cables

Easy installation -- no tools, no software

ASIN: B00077IPC6

Product Description

Simplify your network installations with power and data on one cable! The Linksys Power Over Ethernet Adapter Kit lets you put your access points almost anywhere, by removing the requirement of nearby power outlets. By using the existing Category 5 Ethernet cabling to deliver power to any standard 5 volt access point or other network device, you save the time, hassle, and expense of running AC power to the access point's installation location. The best position for a wireless access point is usually on the ceiling, in the center of the area to be covered. Second best would be high on a nearby wall. Unfortunately, there's usually no easily accessible AC power plugs available in these locations. With the Power Over Ethernet Adapter Kit, installing the access point in these preferred spots becomes far less trouble. The Power Over Ethernet Adapter Kit is a two piece set. The "Injector" sends both power and data over one Category 5 cable to your access point, wireless router or bridge. Then the tiny "Splitter", placed at the remote location, separates the network data and DC power back into two cables, and delivers them to the access point. The Injector can also be used by itself with POE-enabled network devices that accept 48 volts directly on a POE port.This product is a 12 Volt Power Over Ethernet adapter kit.

Electronics:

Electronics

Electronics